Platinum Tier 👑
The ardest tier of the lot.
The Requirements
- Big Jim - 12/12/25 - Video Link
- Big Jim
THE GRIPPER
Your selected Hand Gripper must be officially rated above the RGC threshold for your tier.
Most standard grippers are accepted, any unknown brands will need to be verified upon submission.
As long as your rating falls within the normal range for the known gripper, it will be accepted.
THE LIFT
The close must be completed from a 30mm set.
THE VERTICAL BAR
This lift must be completed using a 50mm / 2" Vertical Bar.
THE HANG
Hang out
Completed By
- Nobody is doing this ever
- Nobody is doing this ever
Gold Tier 🥇
The second ardest of em all
The Requirements
THE DUMBBELL
A geniune Thomas Inch Replica must be used for this feat of strength.
The dimensions of the handle must be:
- Diameter - 60.3mm / 2.375"
- Length - 101mm / 4"
The globes for the dumbbell must be cast from solid steel and completley round. This is to ensure the correct feel and roll.
The dumbbell must weigh within 2% of the required weight ie. If the requirement is 100kg, the dumbbell can not weigh less than 98kg.
THE LIFT
The lift must be completed to lockout with a clear pause at the top to allow for a referees down signal.
The dumbbell must be lifted without any intentional tilt.
THE PLATES
Calibrated plates must be used for this feat of strength.
These plates must meet the following requirements:
- 21 / 22.5mm Diameter
- 450mm Circumference
- Unmodified surface
LIFTING RULES
The lift must be completed to lockout with a clear pause at the top to allow for a referees down signal.
THE GRIPPER
Your selected Hand Gripper must be officially rated above the RGC threshold for your tier.
Most standard grippers are accepted, any unknown brands will need to be verified upon submission.
As long as your rating falls within the normal range for the known gripper, it will be accepted.
THE LIFT
The close must be completed from a 30mm set.
THE VERTICAL BAR
This lift must be completed using a 50mm / 2" Vertical Bar.
hang
Completed By
- Big Jim
- Jimette
Equipment Requirements
Thomas Inch Dumbbell Replicas
A geniune Thomas Inch Replica must be used for this feat of strength.
The dimensions of the handle must be:
- Diameter - 60.3mm / 2.375"
- Length - 101mm / 4"
The globes for the dumbbell must be cast from solid steel and completley round. This is to ensure the correct feel and roll.
The dumbbell must weigh within 2% of the required weight ie. If the requirement is 100kg, the dumbbell can not weigh less than 98kg.
It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.
Plate Pinch
Calibrated plates must be used for this feat of strength.
These plates must meet the following requirements:
- 21 / 22.5mm Diameter
- 450mm Circumference
- Unmodified surface
tbc
tbc
Hand Grippers
Your selected Hand Gripper must be officially rated above the RGC threshold for your tier.
Most standard grippers are accepted, any unknown brands will need to be verified upon submission.
As long as your rating falls within the normal range for the known gripper, it will be accepted.
30mm set
Vertical Bar
This lift must be completed using a 50mm / 2" Vertical Bar.
Approved bars include but are not limited to GOG Dynamite Stick, Grandfather Clock, Hilt, Vertical Cannon.
lockout with a pause
Bodyweight Hangs
strapon toyour body
hang on
